NRT30 Rigging Tower
NRT30 Rigging Tower
The NRT30 is designed to fly for small to medium sizes PA Line Array systems, this PA/Rigging tower is made out of standard Truss elements and a small number of special parts. One Rigging Tower for 3 different heights and load requirements. The PA can be lifted up to a height of approx. 8 m with the help of an electric chain hoist.
Facts
- Use as a delay tower or main audio rigging tower
- Small footprint with sufficient space for build-up and subwoofers between the legs
- Uses standard NH34 Truss
- Static report included
- Built different heights with 1 system
- Up to 6.5 meters no cable set required
- Minimal transport space as base, outriggers and ballast beams are detachable
Product information
The NRT30 is designed to fly for small to medium sizes PA Line Array systems, this PA/Rigging tower is made out of standard Truss elements and a small number of special parts. One Rigging Tower for 3 different heights and load requirements. The PA can be lifted up to a height of approx. 8 m with the help of an electric chain hoist.
The base of the system is made from a special rigging tower frame that is extended with outriggers and a ballast frame. The outriggers are equipped with extendable spindles to level the construction.
The tower consists of standard truss lengths and a special top part with a cantilever that ensures proper positioning of the PA system. After the tower is assembled connect it to the base with hinges, and the hoist chain can be put in. The tower can be erected.
NRT30 Rigging Tower
Productcode Description
NRT-TOP-PA1 Top section for NRT30-5
NH34-Length Square NH34 lengths
NRT-30-8-CS Cable set (only for 8 meter version)
NT-HINGE-01 Hinge set for tower NT30
NRT-BASE-PA Base with outriggers and frame
NRT-OUTR-PA Outriggers for NRT-BASE-PA
NRT-BB-I Ballast beam short
NRT-BB-O Ballast beam long
NRT30-5 PA/ Rigging Tower 5 Meters
| Specifications | Description |
|---|---|
| Type Tower Truss | NH34 |
| Max. Cantilever Top Part | 0,63 m. |
| Max. Height | 5 m. |
| Max. Load Capacity | 400 kg. |
| Amount of Ballast Needed | 2 x 100 kg. |
| Max. Windsurface Front | 2,5 m2 |
| Max. Windsurface side | 1,25 m2 |
NRT30-6,5 PA/ Rigging Tower 6,5 Meters
| Specifications | Description |
|---|---|
| Type Tower Truss | NH34 |
| Max. Cantilever Top Part | 0,63 m. |
| Max. Height | 6,5 m. |
| Max. Load Capacity | 400 kg. |
| Amount of Ballast Needed | 2 x 150 kg. |
| Max. Windsurface Front | 2,5 m2 |
| Max. Windsurface side | 1,25 m2 |
NRT30-8 PA/ Rigging Tower 8 Meters
| Specifications | Description |
|---|---|
| Type Tower Truss | NH34 |
| Max. Cantilever Top Part | 1,2 m. |
| Max. Height | 8 m. |
| Max. Load Capacity | 800 kh. |
| Amount of Ballast Needed | 2 x 1.300 kg.* |
| Max. Windsurface Front | 5,0 m2 |
| Max. Windsurface side | 2,5 m2 |
